磷石膏钾长石复合焙烧样的浸取条件研究.pdfVIP

  • 2
  • 0
  • 约9.69千字
  • 约 3页
  • 2015-08-26 发布于重庆
  • 举报

磷石膏钾长石复合焙烧样的浸取条件研究.pdf

磷石膏钾长石复合焙烧样的浸取条件研究.pdf

2008年7月 磷肥与复肥 Fertilizer 第23卷第4期 Phosphate&Compound ·13· 磷石膏、钾长石复合焙烧样的浸取条件研究 周亮亮,张召述,夏举佩 (昆明理工大学化学工程学院,云南昆明650224) [摘要]采用因素轮换法较系统地研究了温度、时间、液固比、浸取介质、焙烧样细度等对磷石膏、钾长石 qC、浸取时间为2h、液固比为4/1、浸取 复合焙烧样钾溶出率的影响。实验结果表明,当焙烧样在浸取温度为70 介质选用NH3H20且用量为焙烧样质量的2.0%、固样颗粒在0.064~0.074mm时,焙烧样能达到较好的浸取效果。 [关键词]磷石膏钾长石复合焙烧样;因素轮换法;浸取条件;钾溶出率 [中图分类号]TD989;X786[文献标识码]A forroasted of Researchon conditions compositesamples leaching and phosphogypsumpotashfeldspar ZHOU Zhao—shu,XIAJu—pei Liang-liang,ZHANG Chemical Scienceand (School 650224,China) of Engineering.KunmingUniversityof Technology,Kunming,Yunnan Abstract:Theresearchfactorrotationis intheeffectsof systematic by engaged to roasted finenessonthedissolutionratefor ratioof solid.the material,the liquid leaching sample roasted of and resultshowsthatthe potashfeldspar.Theexperimental compositesamplesphosphogypsum roasted havebettereffectswiththe of60 of2 of and samples temperatureoC,time hours,ratioliquid solidof as materialandthe2.0%amountofroasted within 4,NH3·H20 samples,solid leaching particles mm. 0.064~0.074 of and Keywords:roaste

文档评论(0)

1亿VIP精品文档

相关文档