邯钢三炼钢厂LF精炼炉电热特性及其供电制度研究.pdfVIP

邯钢三炼钢厂 LF 精炼炉电热特性及供电制度的研究1 范 佳 徐学良 郝 强 王彦杰 刘红艳 （河北钢铁集团邯钢公司，邯郸 056015 ） 摘 要 本文针对邯钢三炼钢厂LF 精炼炉实际生产情况，开发了LF 精炼炉电热特性分析模型，对该厂的LF 精 炼炉进行电气特性分析，对三炼钢厂 LF 精炼炉各级电压下的经济电流、耐材磨损指数、钢水升温速度等参数进 行了研究，并根据模型分析结果对 LF 精炼炉的供电制度的确定原则进行了分析，为三炼钢优化供电工艺打下基 础，从而达到节能减排、降本增效的目的。 关键词 LF 精炼炉 电热特性分析 经济电流 耐材磨损指数 钢水升温速度 节能减排 Research of the Character of Electric-heating and the System of Current Supply of the LF Fining Furnace of the Third Steel-making Factory of Hansteel Fan Jia Xu Xueliang Hao Qiang Wang Yanjie Liu Hongyan (Hebei Iron and Steel Company Limited Handan Branch，Handan, 056015) Abstract In this paper, according to the LF fining furnace of the third steel-making factory of Han Steel, the model of electric-heating characteristic analysis of the third steel-making factory is developed. The electric-heating character of LF fining furnace of this factory is analyzed .And the economic electricity and the index of fireproofing abrasion and the velocity of heating-up of liquid steel with every level electric voltage of LF fining furnace of the third steel-making factory are researched. According to the analytic result of model, the certain principle of the system of current supply of LF fining furnace is analyzed. It grind the optimization of technology of current supply. And the aim is attained which are energy-saving and release-decreasing and cost reduction and benefit increasing. Key words LF fining furnace, electric-heating characteristic analysis, economic electricity, index of fireproofing abrasion, velocity of heating-up of liquid steel, energy-saving and release-decreasing 某一特性的、超高功率的 LF 电弧炉精炼过程中合理的电气运行制度是其最基本的工艺制度之一，合 理的电气运行制度，不仅对精炼工艺顺行、保证钢种成分要求是必要的，而且有助于降低电耗，电极损耗 和耐材侵蚀，缩短冶炼周期，起到节能减排、降本增效的目的。 1 L