海鑫工业设备的产品—gusher ruthman泵.docVIP

gusher ruthman泵 Manufacturers of Quality Pumps since 1913 ISO 9001:2000 CERTIFIED Custom Design Available Gusher Pumps, manufacturer of Rumaco?, Ruthman, and Gusher? pumps, represents one of the largest selection of centrifugal pumps available from a single manufacturer. Models include close-coupled pumps, end suction pumps, immersed pumps, self-priming pumps, vortex pumps, sludge pumps, multi-stage pumps, full cantilever pumps. Many in vertical or horizontal styles. Ideally suited for small and large flow rates, and our multi-stage pump is capable of heads in excess of 800 ft. We also offer a range of diaphragm pumps, and turbine pumps. Numerous models and sizes permit selection of the most hydraulically suitable pump for many capacity/head ranges without having to up or down size operating characteristics. Gusher Pumps manufactures pumps for a wide range of applications including Din specifications, ANSI specification, machine tool and centralized coolant systems, automatic paint systems, industrial spray washers, filtration systems, phosphate and bonderizing lines just to name a few. PRODUCTS ANSI B 73.1 Specification Horizontal End Suction The 7071 Series is a horizontal, open impeller centrifugal pump that meets the specifications of ANSI B-73.1. The series consists of 3 power end and 33 pump sizes. 7550 Series Vertical Centrifugal End Suction The Gusher 7550 Series has been designed to give heavy duty pumping service in a wide range of industrial applications including spray booths, industrial spray washers, paint, and coolant systems. Sizes range from 1 to 8 discharge with heads up to 275 feet @ 1750 RPM and capacities up to 4000 GPM. 7600 Series Vertical Top Pull Out Centrifugal End Suction This Series has been designed to minimize maintenance. If maintenance is required, the top pull out design allows the rotating element to be removed without disturbing the mounting plate or piping. Sizes range from 1 to 8 discharge with heads up to 275 feet @ 1750 R