GD3 activity (English)外文翻译.pdfVIP

3 A Guide to GD Activities and DRBFM Technique to Prevent Trouble Ver.　　5.0 　　 Shigeto Kano Hirokazu Shimizu Reliability and Strength, Vehicle Technology Dept No. 1 (1/39) 3 How to Implement GD Activities and DRBFM The first invariable principle in ensuring reliability in product development is to make no changes. You should keep this in mind. Although the principle is to make no changes, we understand that you have many things to change when producing a new design. That is what you must 3 pay attention to. The concept of GD to note the changes and use techniques different from conventional techniques for controls and checks, thus achieving the high goal of preventing the outflow of the problems encountered. The changes you must note are what a designer changed deliberately and what changed in loads and environmental conditions imposed on a specific component due to ambient conditions despite the lack of change in the component design. The DRBFM technique is to use the FMEA, Design Review and other techniques (which have so far been used for controls) as techniques for creation (for awareness). The first requirement to complete a product in a short development period is to produce a design with few problems, or a good design. To that end, it is important to make no changes that are unnecessary. You should also identify problems in the first stage of development. To that end, it is important to have a good discussion on the design