《lighting-controls-troubleshooting》.pdf

TROUBLESHOOT GUIDE Troubleshoot Procedure (See inside pages for details.) Check 1 LED’s (Red) Check the status of the LED’s on the switch where address is operated. LED’s (Green) Check 2 Indicator LED(Red) Check the status of the indicator LED on the pattern/ group setting switch. Check 3 Check the status of the short circuit indicator LED on the Transmission Unit and the Amplifier. Indicator LED (Red) Check 1 Check 2 Check 3 Check the Check the status Check the status of the indicator lamp of the short operated switch LED. LED on the indicator LED on Troubleshooting pattern /group the Transmission setting switch. Unit or Amplifier. LED status LED status before operation after operation Does the transmission unit short No change indicator LED go OFF when the g (both Red and n signal wire is removed from the NO i Green OFF) h FULL-2WAY signal wire terminal There may be a transmission unit mal