美国标准的铝合金性能比较.docVIP

ACTIVE STANDARD: B107/B107M-06 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire1. Scope1.1 This specification covers magnesium-alloy extruded bars, rods, profiles, tubes, and wire of the composition given in .1.2 The values stated in either inch-pound or SI units are to be regarded separately as standards. The SI units are shown in brackets or in separate tables or columns. The values stated in each system are not exact equivalents; therefore, each system must be used independent of the other. Combining values from the two systems may result in nonconformance with the specification.1.3 Unless the order specifies the M specification designation, the material shall be furnished to the inch-pound units.2. Referenced DocumentsB275 Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and WroughtB296 Practice for Temper Designations of Magnesium Alloys, Cast and WroughtB557 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy ProductsB557M Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]B660 Practices for Packaging/Packing of Aluminum and Magnesium ProductsB666/B666M Practice for Identification Marking of Aluminum and Magnesium ProductsE29 Practice for Using Significant Digits in Test Data to Determine Conformance with SpecificationsE35 Test Methods for Chemical Analysis of Magnesium and Magnesium AlloysE527 Practice for Numbering Metals and Alloys (UNS)E55 Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition