数控技术专业英语 作者 刘瑛 13.pptVIP

6．This is an ideal solution, but there is not currently any standard governing this exchange. 这是理想的解决方案，然而目前尚无任何标准管理这种交换。 7．One other option for CAD/CAM model exchange is to use a reverse post-processor. A reverse post-processor can create a CAD/CAM model from a G M-code of NC part program. CAD/CAM模型交换的另一种方法是利用逆向后置处理器。逆向后置处理器可以从数控G M代码程序生成CAD/CAM模型。 8．These programs do work; however, the programmer must spend a considerable amount of time determining the design intent of the model and to separate the toolpaths from the geometry. 这种程序确实有些作用，但是，程序员必须花相当多的时间去搞清楚模型的设计意图，而且还要将刀具