TECHNICALSPECIFICATIONOFTOOLCUTTER.docVIP

PROCESS AND PRODUCT DEVELOPMENT CENTRE FOUNDRY NAGAR, AGRA TENDER DOCUMENT FOR SET OF MACHINE TOOLS TENDER COST: Rs. 3000.00 EMD: Rs. 50,000.00 LAST DATE OF SUBMISSION: 10.11.2010 DATE OF OPENING: 12.11.2010 AT 3: 00 P.M VENUE: P.P.D.C., AGRA (TENDERS TO SUBMIT THIS DOCUMENT DULY FILLED IN AUTHENTICATED) TECHNICAL SPECIFICATION OF “CYLINDRICAL GRINDING MACHINE” QTY : 01 No. PPDC Requirement Supplier offer Deviation if any 1. Max Grinding length 600 mm 2. Max height of centres 130 mm 3. Max swing over bed 259 mm 4. Max grinding dia 100 mm 5. Table feed range 0.5/1-5m/min 6. Max table swivel 7+3 =10 7. Hyd. Power motor 1.1 kw 8. Workhead swivel either side 900 towards wheel head 300 away from wheel head 9. Work Spindle speed 4 10. Work spindle speeds range 65, 140, 205, 300 rpm 11. Work head motor 0.37 kw 12. Taper in work spindle MT-3 13. Taper in tail spindle MT-3 14. To fro swivel of wheel head at base 600 towards wheel head 450 towards tail stock 15. Traverse movement of wheel head max 125 mm 16. Size of grinding wheel 354x40x127 mm 17. Min. dia of worm out wheel 205 mm 18. RPM of grinding wheel 1750/2000 19. Wheel head motor 2.2 kw 20. Min max. dia of internal grinding wheel 12 to 40 mm 21. Min max. dia of hole for grinding 18 to 50 mm 22. Motor for internal attachment 0.75 kw 23 coolant pump motor 0.07 kw 24 Gross weight with packing 2400 kg. Approx. 25. Standard equipment Coolant pump fitted on tank, one, dressing tool holder, grinding wheel fitted on grease gun, oil can, dead centers, key spanners, wheel flange fitted on 26. Optional equipments Internal grinding attachment, 4 jaw chuck 6”, 3 point steady rest, 2 point steady rest, radius truing device, balancing stand, balancing mandrel spare wheel flange. TECHNICAL SPECIFICATION OF “SHAPING MACHINE” (Hydrauli