THEMONARCHMACHINETOOLCOMPANY-IgorChudov.PDFVIP

Models AA-BB-C-CK-CU-CY Models EE-K-M-N-NN-W THE MONARCH MACHINE TOOL COMPANY SIDNEY, OHIO, U. S. A. MONARCH Page 2 HANDLING AND INSTALLATION This Monarch lathe is a precision machine CLEANING tool, built from the very finest materials, thoroughly tested for accuracy and performance, skidded and Before the carriage or tailstock are moved on crated in the best manner to reach its destination the bed, the anti-rust slushing compound should in as near perfect condition as possible. be carefully wiped from all surfaces, preferably with rags dipped in gasoline or naphtha, to make This lathe must be handled carefully to avoid sure that all grit or other foreign substance has injury. The photographs on the opposite page show been carefully removed. After this is done a thin the proper method of lifting the various models — film of oil should be applied to the bearing surfaces check the model of the lathe on the identification before these parts are moved along the bed. After plate shown below in order to select the picture for the r