副槽及出风口结构尺寸对汽轮发电机转子三维温度场的影响.pdfVIP

第 31 卷 第 26 期 中 国 电 机 工 程 学 报 Vol.31 No.26 Sep.15, 2011 90 2011 年 9 月 15 日 Proceedings of the CSEE ©2011 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2011) 26-0090-07 中图分类号：TM 311 文献标志码：A 学科分类号：470·30 副槽及出风口结构尺寸对汽轮发电机转子 三维温度场的影响 路义萍，郑国丽，韩家德，王佐民 (哈尔滨理工大学机械动力工程学院，黑龙江省 哈尔滨市 150080) Effect of Structure Size of Sub-slot and It’s Air Outlet on Three-dimensional Temperature Field for Turbo-generator Rotor LU Yiping, ZHENG Guoli, HAN Jiade, WANG Zuomin (School of Mechanical Power Engineering, Harbin University of Science and Technology, Harbin 150080, Heilongjiang Province, China) ABSTRACT: This paper took an example of a large air-cooled 对该文电机采用的风路布置方法，副槽采用直槽、槽楔采用 turbine generator rotor and established the whole three- 等出风口直径更加合理。结论可为大型空冷汽轮发电机转子 dimensional physical model of single coil of the longest 的通风冷却设计提供理论参考。 ventilation duct of half a rotor including protective ring. Effect 关键词：汽轮发电机；转子；温度场；副槽中心；截面高度 of rotor body ventilation structures, such as the center section 0 引言 height of the sub-slot and slot wedge outlet diameter range distribution on three-dimensional temperature field for rotor 由于空冷汽轮发电机的市场需求不断增加，机 was studied according to the computational fluid dynamics 组的单机容量越来越大，电机运行时产生的单位体 method. The results show that, there is difference between the 积损耗也随之增长，引起电机各部分温度升高，这 actual and design value according to flow rate distribution 直接影响了电机的寿命和运行的可靠性，所以电机 predicted tempera