本科毕业设计刮板式花生壳仁分离机资料.docVIP

本科毕业论文（设计） 题 目 刮板式花生壳仁分离机 专 业 机械设计制造及其自动化 作者姓名 学 号 2011205903 单 位 机械与汽车工程学院 指导教师 2015年5月 教务处编 原创性声明 本人郑重声明：所提交的学位论文是本人在导师指导下，独立进行研究取得的成果。除文中已经引用的内容外，论文中不包含其他人已经发表或撰写过的研究成果，也不包含为获得聊城大学或其他教育机构的学位证书而使用过的材料。对本文的研究作出重要贡献的个人和集体，均在文中以明确的方式表明。本人承担本声明的相应责任。 学位论文作者签名： 日期： 指 导 教 师 签 名: 日期： 摘要中国花生仁的出口量每年约在5万吨左右关键词Abstract The export volume of peanut in China is about 50000 tons per year.，a lot of peanut products need to shell processing peanuts，labor to shell time-consuming and laborious Peanut shell machinery to the liberation of the labor force, Increase production efficiency and it is conducive to the rapid development of peanut processing. But the research on the mechanical problems of the peanut hull is slow in China. And it did not get good results in the peanut shell rate and damage rate of two important indicators. The overall performance of the peanut shell machinery is also hovering become.So,The design of the scraper type peanut shell and kernel separator,from stadying the existing peanut shell principle and the related mechanical structure in China. This mechanical ingenious will scraper and the design of the shell box to integrate. The purpose of peanut shell by peanut shell is peanut by friction and extrusion. The peanut shell and peanut kernel were collected by the separator device next. This improves the shell rate of peanuts and reducing the breakage rate of peanut kernel. This machine also has the advantages of easy operation, cheap price, strong environment adaptability and so on. Keywords：Scarper machine; Peeling machine；Driving mechanism 目录 摘要 I Abstract II 1 绪论 - 1 - 1．1 课题提出的背景 - 1 - 1．