毕业论文----新型家庭防盗报警系统的设计要点.doc

摘要 、GTM900C模块本文用华为生产的GTM900C模块，借用无线发送和接收、基带处理等功能，来实现无线数据传输和短信收发任务。GSM移动网络，以最直观的中文短消息，直接把报警地点的情况反映到您的手机屏幕上。它采用被动式红外传感器进行检测，变有形的传统防盗网防盗窗为无形，给火灾时的逃生提供方便。并配备烟雾传感器和燃气泄漏传感器，实现防火、防燃气泄漏的作用。为了，利用采用外部供电方式，结合 单片机，外加串口电路，报警电路以及显示模块，设计了检测并报警的硬件系统。实例表明，该系统工作稳定，操作方便，成本低廉，实现了报警功能。该设计主要是相关技术的工作原理，分析实现功能要求电路的工作过程及设计，软件编程来实现报警系统的发送及接收。关键字：GTM900C模块；单片机； Abstract This system is mainly composed of MCU, GTM900C module and the sensor. In this paper, with Huawei production GTM900C module, borrow the wireless transmission and reception, baseband processing function, to realize wireless data transmission and messaging tasks. With the most reliable, most mature GSM mobile network, the most intuitive Chinese short message or telephone, directly to the alarm location is reflected onto your mobile phone screen. It uses a passive infrared sensor to detect, turned the traditional alarm net and alarm for the invisible window, fire escape to provide convenient. And equipped with smoke sensor and gas leakage sensors, to achieve fire, gas leakage prevention effect of. In order to achieve the anti-theft family of real-time monitoring, using a passive infrared sensor, the external power supply, combined with AT89S52MCU, plus serial circuit, an alarm circuit and a display module, design of detection and alarm system. Examples show that, the system is stable, convenient operation, low cost, realize the home burglar alarm message function. The design is mainly passive infrared sensor technology principle, analysis of the realization of the functional requirements of the working process of the circuit and design, software programming to achieve home burglar alarm system to send and receive. Keywords: GTM900C module ；Microcontroller ；Passive infrared sensor 第一章 前言 1第章 2 2.1AT89S52的主要性能 2 2.2AT89S52的功能特性描述 2 2.3AT89S52各引脚功能介绍 3 第三章 GTM900C无线模块 3.1 GTM900C模块简介 3.1.1 GTM900C模块产品定位 3.1.2 GTM900C模块产品特性 3.1.3 GTM900C模块产品的应用 3.1.4 GTM900C模块的业务演示框图 3.2 GTM900C无线模块AT命令 3.2.1 AT命令类型