power520-9408-M25-U9408.M25答案.docx

POWER6 information Locations Use this information to help you map a location code to a position on the unit. The following diagrams show field replaceable unit (FRU) layouts in the system. Use these diagrams with the following tables. Rack views Figure 1. Rack front view with 3.5 inch DASD Figure 2. Rack front view with 2.5 inch DASD Figure 3. Rack top view, without fans Figure 4. Rack top view, with fans Figure 5. Rack rear view Stand-alone views Figure 6. Stand-alone front view with 3.5 inch DASD Figure 7. Stand-alone front view with 2.5 inch DASD Figure 8. Stand-alone side view without fans Figure 9. Stand-alone side view with fans Figure 10. Stand-alone rear view The following table provides location codes for parts that comprise the server. Table 1. FRU location tableFailing item namePhysical location codeIdentify LEDSystem unit Un?FansFan 1Un-A1YesFan 2Un-A2YesFan 3Un-A3YesFan 4Un-A4YesPower suppliesPower supply 1 Un-E1YesPower supply 2 Un-E2YesBackplanesInput/output backplane with embedded: RIO Hub/HSL NIC RIO/HSL link Ethernet controller USB controller (AIX? or Linux environment only) SAS controllers Logic oscillator Service processor Processor 1 Processor 2 SPCN Time-of-dayUn-P1YesTime-of-day batteryUn-P1-E1?DASD and media backplaneUn-P2YesDVDUn-P2-D2?System backplane cablesSystem serial cable 1 (top connector)Un-P1-T3?System serial cable 2 (bottom connector)Un-P1-T4?Embedded USB front cableUn-D1-T1?Embedded USB rear cable 1Un-P1-T7?Embedded USB rear cable 2Un-P1-T8?SPCN cable 1 (top connector)Un-P1-T1?SPCN cable 2 (bottom connector)Un-P1-T2?HMC 1 (left connector)Un-P1-T5?HMC 2 (right connector)Un-P1-T6?Dual 1 GB Ethernet cable 1Un-P1-C7-T1?Dual 1 GB Ethernet cable 2Un-P1-C7-T2?Quad 1 GB Ethernet port 1Un-P1-C7-T1?Quad 1 GB Ethernet cable 2Un-P1-C7-T2?Quad 1 GB Ethernet cable 3Un-P1-C7-T3?Quad 1 GB Ethernet cable 4Un-P1-C7-T4?Ext