RC汽车模型底盘的简要设计与制造—毕业设计.docxVIP

摘要汽车底盘是集成四大系统的平台，底盘是直接影响汽车性能的重要因素。本文设计计算的属于RC（遥控）汽车模型的底盘。对于RC汽车模型，它对普及汽车基本知识有良好的推广作用；对青少年在团队精神、分享合作等方面有良好的促进，同时对在日常生活中的人们带来新的减压方式。本文主要对RC汽车模型底盘其中的传动系和行驶系作简要的计算，通过已有的成熟的汽车计算方法。首先确定RC汽车模型的尺寸、整备质量等参数。然后计算确定能够满足模型车变速器齿轮的模数、齿数和同步器，并进行校核，得出符合要求的数据。根据变速器的数据对模型车车桥中的主减速器、差速器及半轴的选择、计算校核，并对车桥桥壳进行设计、强度的计算和材料的应力计算。最后对RC汽车模型的悬架类型的选择、参数的确定及对钢板弹簧的计算校核使其满足载荷的要求。本文计算设计的RC汽车模型是对原有真实汽车的比例进行缩小。对其的结构作了简化，在简化过程力求结构强度符合要求。在一些结构上采用了简洁的设计方案，带来计算求解的方便，减少对材料的浪费，降低制造成本。关键词：RC汽车模型；底盘；变速器；车桥；钢板弹簧The chassis of RC model car which are designed and manufacturedStudent:HUANG shao-yang Teacher:SUN jin-rongAbstract：Chassis is the integration platform of the four systems, chassis is important factors that directly affected the performance. It belongs to RC (remote control) model car chassis design calculations in this paper. For RC model car, It popularize basic knowledge of car has a good role in the promotion; for young people in terms of promoting good teamwork, sharing and cooperation; while people in their daily lives to bring new decompression.This paper focuses on RC (remote control) model cars chassis which the drivetrain and running gear with a brief calculation, through the existing mature vehicle calculation method, First, the size, curb weight and other parameters of RC model car are determined, Then calculate and determine the model can meet the vehicle transmission gear modulus, tooth number and synchronizer, and check. Can meet the requirements of the data, According to the transmission of data to the model of car main reducer, differential and axle shaft selection, calculation and check, and design the axle housing, strength calculation and stress calculation, Finally, selection the type of suspension of RC car model, parameter determine, calculation and verification of the leaf spring to meet the load requirements. RC model car is calculated in this paper design of the original true proportion of cars is reduced. Its structure has been simplified, it seeks to simplify the process to mee