bf型手动液压搬运车维修说明书-ningbocholiftforkliftco.,ltd.pptVIP

Put “G” type clamp as picture 5, and tighten the clamp in direction A until the screwdriver into hole No.7. Please be attention the plunger should be kept in straight during the tightening process. “G” type clamp should not slip from the head. Put screwdriver inside and loosen the clamp in direction B to take away “G” type clamp. Assemble handle: refer to HANDLE ASSEMBLY MANUAL Install plunger pump WARNING! 1.The screw head of “G” type clamp should be welded with a ring and the ring should be fitted into Part No.1, or it will be dangerous. 2.It needs to have pressure test after pump assem