Communication Class.pptVIP

Communication Class Cao Huiyang Terminal Project Group Introduction Management Overview Device Organization Device Operation Interface Definitions Communication Class Interface The Data Class defines a data interface as an interface with a class type of Data Class. Data transmission on a communication device is not restricted to interfaces using the Data Class. Rather, a data interface is used to transmit and/or receive data that is not defined by any other class. This data could be: Some form of raw data from a communication line. Legacy modem data. Data using a proprietary format. Protocol Data Wrapper Endpoint Requirements 3.5 Device Models 3.6 USB POTS Models 3.6.1 Direct Line Control Model DL Model Datapump Model 3.6.2 Abstract Control Model Abstract Control Model Serial Emulation 3.6.3 USB Telephone Model Telephone Control Model 3.7 USB ISDN Models 3.7.1 Multi-Channel Model Topology 3.7.2 USB CAPI Model CAPI Control Model 3.8 USB Networking Models 3.8.1 Common Data Plane Characteristics Segment Delineation Segment Size 3.8.2 Ethernet Networking Control Model 3.8.3 ATM Networking Control Model Your satisfaction is our success!Wish we cooperate the delectation! * Potevio Institute of Technology There are three classes that make up the definition for communication devices: the Communication Device Class,Communication Interface Class and the Data Interface Class. The Communication Device Class is a device level definition and is used by the host to properly identify a communication device that may present several different types of interfaces. The Communication Interface Class defines a general-purpose mechanism that can be used to enable all types of communication services on the Universal Serial Bus (USB). The Data Interface Class defines a general purpose mechanism to enable bulk or isochronous transfer on the USB when the data does not meet the requirements for any other class. Several types of communication devices can benefit from the