风柴互补供电系统快速充电模块的硬件设计.docVIP

摘 要 风柴互补供电系统两种模式Abstract Wind / diesel hybrid power supply system works in two modes that wind and diesel power generation. In wind/diesel hybrid power supply system, lead-acid battery can play the role of the intermediate buffer and storage, Therefore, lead acid batteries has to achieve fast charging result, so the fast charge module is one of the key components. This module is designed to make the lead-acid batteries get fast charging result in wind / diesel hybrid systems supply power. This paper described the design of a fast intelligent charging system for Lead-acid batteries, based on the analysis of the charging theory and the investigation of many charging methods, and designed a fast charging method that according to the different internal resistance of lead-acid batteries with different charging current to achieve fast charging effect based on AT89C51 SCM, a three-stage charging strategy was utilized. At the first charging stage, small current Pre-charge the battery, and the Second charging stage，with Pulsed charging method. At the last stage use the float charging method for Complement. And in the entire fast charging period，has taken timely measures to eliminate polarization of the batteries to avoid producing a Large amount of gas in the charging period，and the Problem of excessively temperature rise. The theory and the tests indicated that by application of the charge strategy, the charging efficiency was raised and the charging period was reduced. And the charging control system was based on AT89C51 SCM，Through the acquisition of the battery terminal voltage, temperature and charge current status information，etc. into the SCM for analysis and processing of control signals corresponding to control the IGBT on/off of the main circuit, In order to achieve the intelligent battery charging strategy. In the fast-charge control technology and the realization of charging method mainly using the battery voltage, battery Maximum voltage and its temperature as