cad2004图文教程.docVIP

Autocad2004【cad2004】破解简体中文版安装图文教程 第一步：将下载好的AutoCAD2004压缩文件进行解压。 第二步：打开AutoCAD2004的主安装程序。 第三步：开始安装AutoCAD2004主程序。  第四步 在弹出的对话框中，点击“安装”按钮 第五步：接受“安装协议”。 第六步：输入安装“序列号”，默认即可。 第七步：输入用户信息。 第八步：选择“典型”安装。 第九步：设置安装路径。 第十步：开始安装AutoCAD2004。 第十一步：安装结束，退出安装界面。 第十二步：注册软件 到了这里Autocad2004中文版的安装已经全部完成。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electri