公共卫生与预防类笔试大纲.doc

公共卫生与预防医学类笔试大纲 一、流行病学 1．流行病学定义、常见流行病学分支、研究方法与策略。 2．疾病分布；疾病频率的测量指标；疾病的人群分布、地区分布、时间分布的内容。 3． 4． 5． 6． 7． 8．WHO对免疫预防策略；全球主要疾病免疫预防进展。 9． 10． 二、急性传染病的预防与控制 1． 传染病报告的责任人与义务报告人；法定传染病的种类与报告时限；突发公共卫生事件的定义与分类。医疗机构和疾控机构的传染病报告管理制度；传染病防治法相关内容。 2． 传染病的预防和控制策略；流行过程的概念、三个基本环节及其影响因素；主要预防控制措施；疾病监测的基本理论和技术方法；预防接种的定义与分类，我国的免疫规划程序，不良反应的报告与处理；常见传染病的诊断、疫情的调查与处理。 三、卫生统计学 1． 2． 3． 4． 5．6． 四．卫生毒理 1． 2． 3． 4． 5． 6． 五、环境卫生学 1． 2． 3． 4． 5． 6． 7． 8． 9． 六、劳动卫生与职业病 1． 2． 3． 4． 5． 6． 七、营养与食品卫生学 1． 2． 3． 4． 5． 6． 7． 8． 9． 10． 八、儿少卫生学 1． 2． 3． 4． 5． 6． 九、社会医学 1． 2． 3． 4． 5． 十．健康教育与健康促进 1． 2． 3． 4． 5． appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width 1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8