3胶带加工技术.pptVIP

Today’s Topics Converting Industry and Product Trends Die Cut Methods Converting Terminology Processing Issues Review Die Cutting Methods Die Cut Part Formats Individual pieces Roll format Sheet format (multiple parts) Die Cut Tooling Steel Rule Engraved Rotary Male-Female Steel Rule Die Cutting Steel Rule Die Cutting Flatbed die cutting Parts can be provided in roll or sheet format Good for thick materials Tolerance Low Cost Shortest lead time Engraved Die Cutting Typically flatbed process Parts provided in roll or sheet format Allows for intricate shapes/sizes Tolerance More expensive than steel rule Medium lead times Dies dull quickly; not easily resharpened Limited material thickness Stop and Pad 保 护 垫 Rotary Die Cutting Rotary Die Cutting Process in roll form Finished parts in roll or sheet form High speed reduces per part cost Tolerance Expensive with medium lead times Dies difficult to resharpen Limited material thickness Male-Female Flatbed process Finished parts in individual pieces 元 件 是 个 体 的 Allows for intricate shapes/sizes 可 用 于 设 计 复 杂 的 元 件 Offers tightest tolerances 公 差 最 小 Long die life 刀 模 的 寿 命 长 Broad range of material capabilities 可 以 使 用 于 不 同 基 材 Very expensive with long lead times Converting Terminology Laminating 复 合 Butt Cut 根 端 切 材 Baloney Slitting 平 刃 分 层 分 切 Rewind Slitting 重 绕 分 切 Razor Slitting 剃 刀 分 切 Score Slitting 刮 刀 分 切 Shear Slitting 剪 刀 分 切 Converting Terminology Spool Winding 线 管 卷 绕 Dry Edge 无 胶 边 Extended Liner 扩 长 离 型 纸 Kiss Cutting 面 切 式 加 工 Laminating 复 合 Adding adhesive to non-pressure sensitive material to make it pressure sensitive 把 胶 和 各 种 材 料 复 合, 配 合 成 胶 带 Joining to material together with adhesive 使 用 胶 将 两 个 基 材 结 合 在 一 起 Typically done in roll format (dependent on material) 过 程 多 般 是 卷 状 式 Ensure upper and lower nip rolls are smooth, clean, parallel, with properly adjusted pressure. 保 证 上 下 卷 辊 是 干净, 光 滑, 对 平, 和 压 力 调 好. In out feed tables must be on the same level. 进 出 板 须在 同 个