Printf 函数(非常好用).docVIP

Printf 函数（非常好用） #include include.h#define IsDigital(c)??((c=0) (c=9))//判断是否为数字 static char * digits = 0123456789abcdefghijklmnopqrstuvwxyz;char *strbuf;void ReverseStr(char *str);void UART_Init(void){?UART2_CR1 = 0X00;?UART2_CR3 = 0X00;?UART2_BRR2 = 0X0B;?UART2_BRR1 = 0X08;?UART2_CR2 = 0X0C;//使能发送?}void myputchar(uchar dat){??sim();??? if (dat == \n)??? {????? while (!(UART2_SR 0x40)); //等到发送完成再发送 ????? UART2_DR = (\r); ????? /* Wait transmission is completed */ ????? while (!(UART2_SR 0x40)); ??? }??? while (!(UART2_SR 0x80));? //等到数据移到移位寄存器 ??? UART2_DR = (dat); ??? /* Wait transmission is completed */ ??? while (!(UART2_SR 0x80));??rim();}int mystrlen(char *str)//求字符串长度{?int i=0;?while(*(str++))??i++;?return i;} int Str2Digital(const char **str)//将字符串转换成整数{?int i=0;?while(IsDigital(**str))??i = i*10+*((*str)++) - 0;?return i;}void Float2Str(float num,char *str,int precision)//浮点数转换成字符串{?int m;?float n;?int k=0;//控制指针走向?m = (int)num;?n = num-(float)m;??while(m)?{???*str= *(m%10 +digits);???m=m/10;???k++;???str++;?}?*str = \0;?ReverseStr(str-k);//整数倒置?*(str++)=.;?n = n*10.0;?while(precision-- n)?{??m = (int)n;??*str= *(m+digits);??n=(n-(float)m)*10.0;??str++;?}?*str=\0;}void Int2Str(int num,char *str)//整数转换成字符串{?int k=0;?if(num 0)?{???num = -num;??*str++=-;?}?while(num)?{???*str= *(num%10 +digits);???num=num/10;???str++;???k++;?}?*str = \0;?ReverseStr(str-k);?}void ReverseStr(char *str)//字符串倒置{?char tmp;?int i,len;??len = mystrlen(str);?for(i=0;ilen/2;i++)?{??tmp =*(str+i);??*(str+i) = *(str+len-1-i);??*(str+len-1-i) = tmp;???}}void Convert(int num,int n , char *str)//十进制转换成任意进制{?while(num)?{???*str= *(num%n +digits);???num=num/n;???str++;?}?*str = \0;} char * AddBuf(char *buf,char *str,int precision,int width,int flag)//字符串添加到buf里{?int len = 0;?int i;?len =mystrlen(str);//?printf(len:%dstr:%s,len,str);??if( precision 0)??precision = len;?else if