怀乡7803中断故障处理经过.docVIP

怀乡7803中断故障处理经过 编写单位编写人姓名关键字资料背景信宜怀乡7802中断告警，怀乡下带同时中断MM-XYRML-DSW-1.M.S8512disp int g4/1/5 GigabitEthernet4/1/5 current state : DOWN IP Sending Frames Format is PKTFMT_ETHNT_2, Hardware address is 000f-e227-134a Description: To_MM-XYHuaiXiang-ASW-1.M.S7803-1G::GE3/0/1 The Maximum Transmit Unit is 1500 Media type is optical fiber, loopback not set Port hardware type is 1000_BASE_LX_SMF 1000Mbps-speed mode, full-duplex mode Link speed type is force link, link duplex type is force link ……. MM-XYRML-DSW-1.M.S8512sys System View: return to User View with Ctrl+Z. [MM-XYRML-DSW-1.M.S8512]int g4/1/5 [MM-XYRML-DSW-1.M.S8512-GigabitEthernet4/1/5]undo shut [MM-XYRML-DSW-1.M.S8512-GigabitEthernet4/1/5]quit [MM-XYRML-DSW-1.M.S8512]quit MM-XYRML-DSW-1.M.S8512 但重启完后端口状态依然为down，证明不是该端口原因导致。从拓扑图上可以看到怀乡7803有两条上行链路，是有备份路由的，但备份路由并未起作用，否则节点是不会中断的。从拓扑上看，怀乡7803的另外一条链路上行至信宜解放路8505，登录信宜解放路8505查看相应下联怀乡7803的端口信息如下： MM-XYJFL-DSW-1.M.S8505disp int g2/1/19 GigabitEthernet2/1/19 current state : UP IP Sending Frames Format is PKTFMT_ETHNT_2, Hardware address is 000f-e25a-5707 Description: To-MM-XYHuaiXiang-ASW-1.M.S7803-G3/0/6 The Maximum Transmit Unit is 1500 Media type is optical fiber, loopback not set Port hardware type is 1000_BASE_LX_SMF 1000Mbps-speed mode, full-duplex mode Link speed type is force link, link duplex type is force link Flow-control is not enabled The Maximum Frame Length is 1552 Broadcast MAX-ratio: 50% Allow jumbo frame to pass PVID: 1 Link-status hold interval:3 Sec Port link-type: trunk VLAN passing : 13 VLAN permitted: 13 …. MM-XYJFL-DSW-1.M.S8505disp mac- int g2/1/19 MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s) 000f-e2b2-0ef4 13 Learned GigabitEthernet2/1/19 AGING --- 1 mac address(es) found on port GigabitEthernet2/1/19 --- MM-XYJFL-DSW-1.M.S8505disp curr int g2/1/19 # interface GigabitEthernet2/1/19 description To-MM-XYHuaiXiang-ASW-1.M.S7803-G3/0/6 spe