earthingand bonding- solase learning（earthingand粘结solase学习）.docVIP

Trade of Electrician Standards Based Apprenticeship Earthing and Bonding Phase 2 Module No. 2.2 Unit No. 2.2.6. COURSE NOTES  Created by Eugene Trindles – Cork TC Revision 1 April 2000 by Eugene Trindles – Cork TC Charlie Walsh - Athlone TC Revision 2 Nov. 2002 by Eugene Trindles – Cork TC Chris Ludlow – Dundalk TC Revision 3 May 2006 by Chris Ludlow – Dundalk TC Revision 4. Feb 2008 By Chris Ludlow - Dundalk TC Revision 5. July 2009 By Chris Ludlow - Dundalk TC Revision 6. October 2009 By Chris Ludlow - Dundalk TC Revision 5, November 2013 SOLAS Compiled by Liam Carroll – Certification Standards Published by 27-33 Upper Baggot Street Dublin 4 Ireland ? SOLAS - 2013 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the copyright owner.Table of Contents Introduction 4 Definitions 5 Earthing 6 Types of System Earthing 11 Equipotential Bonding 14 Unit Related ETCI Rules 20 Introduction Welcome to this section of your course, which is designed to enable you the learner, understand the terms earthing and bonding. It is vitally important to be able to distinguish between them. There is a lot of confusion in this area on the part of a large number of people working with electricity. Objectives By the end of this unit you will be able to: Understand the term “earthing” and the reasons for earthing Explain important terms associated with earthing Install an earthing system in a domestic installation Understand the term “bonding” and the basic reasons for bonding Explain important terms associated with bonding Install a main bonding system in a domestic installation Install a local bonding system in a domestic installation Reasons Understanding this information will allow you install corr