releasenotes–haworthcanvas-configura.docVIP

Release Notes: Canvas Extension Version 4.2.44 (May 1, 2014) Beside: Fixed the functionality to disable applying non-finish scheme properties. Beside: Material Pickers now apply materials/finishes correctly based on the selected component types. Canvas: Exporting to DWG should now leave all parts/attributes visible. Canvas: Fixed a crash that could occur when trying to generate Panel Type Elevations with blocks. Canvas: Fixed a crash that was caused by deleting reconfiguration tags. Compose Storage Enhancements: 2D graphics should now appropriately export to DWG. Compose: Added a validation when using wood variable height covers in 90° scenarios with adjoining trim covers. Compose: Panels now can route power from Below Worksurface level to Beltline level. Enclose / Enclose Frameless Glass: Best Latchsets no longer erroneously appear to offer standard cores, FSB finish codes have changed, and it is now possible to spec double swing doors without a second latchset. Enclose/Enclose Frameless Glass: Fixed a crash that could occur when Existing or Inventory intersections/posts were copied into new drawings. Enclose: Allocation quantities for Drywall Screws and Freestanding Splice Plates have been adjusted. Enclose: Half-reveals should now be correctly allocating when mounting product to panel slots. LifeSPACE: Bright Chrome (U2_625) is no longer available for D352 Pulls. LifeSPACE: Fluorescent Dimmer Switches are no longer supported due to ballast specification requirements. Planes: Fixed a crash that could occur when loading old drawings with particular Training Tables in it. Planes: Fixed a crash which could occur when trying to place ganging brackets. PREMISE: 2-way and 3-way connectors now have the appropriate part numbers. Reside: Particular worksurfaces no longer have misplaced supports when snapping to other worksurfaces. Systems: New Brisa fabrics have been added. Tables: Fixed a crash that could occur when loading old drawings with certain tables in them. Wall