0 GENERAL (EVA).doc

G- GENERAL G.1 GENERAL PROVISION It is the intent of these Specifications hereinafter called the “Specifications”, accompanying plan(s) to describe and set forth the details of technical matters such as design, performance, capacities, construction, equipment, material, etc., required for building a vessel suitable for carrying the following cargo which is allowable to within the scope of these Specifications and/or General Arrangement Plan(s) attached hereto. Oil Petroleum products IMO II III, D cargoes according to IBC code and compatible with the Specifications. Intended Cargo List to be subject to Buyer’s review. Should the Buyer request carriage of additional cargoes such requirement will be accommodated by the Builder at reasonable cost. The vessel to be designed, constructed, equipped, tested and delivered to the Owner by the Builder in accordance with the Contract, these Specifications and Plan(s) for worldwide service as approved by the Classification Society and statutory requirements which the Society is authorized to implement. Wherever “Owner” is mentioned in these Specifications, it means exactly the same as “Buyer”. Wherever “Owner’s supervisor” or “Owner’s local supervisor” or “Owner’s Representative” is mentioned in these Specifications, it means exactly the same as “Buyer’s Representative”. Wherever “Shipbuilding Contract” is mentioned in these Specifications, it means exactly the same as the “Contract”. Wherever “Builder’s Standard” is mentioned in these Specifications, it means exactly the same as “Builder’s Practice” as defined in the Contract. The Builder to furnish the vessel all items required by the Rules and Regulations as specified in section G.6 “CLASSIFICATION, RULES AND REGULATIONS”, also all items which are specified herein except those items specifically stated herein as to be supplied by the Owner. Anything not mentioned in these Specifications but which is required by the classification society and other regulato