implementation rulesfor mandatory certificationof motor vehicle（实现rulesfor强制certificationof机动车）.doc

Ref . No. IMPLEMENTATION RULES FOR COMPULSORY CERTIFICATION OF HELMETS Helmets for Motorcycle Users Announced on April 1, 2002 Implemented on May 1, 2002 Issued by Certification and Accreditation Administration of People’s Republic of China contents 1 Scope 3 2 Definition 3 3 Certification model 3 4 General requirements for certification 3 4.1 Application for certification 3 4.2 Type testing 3 4.3 Initial inspection in the factory 4 4.4 Evaluation of certification results and approval of certification 4 4.5 Follow-up inspection 6 5 the Certificate 7 5.1 The validity of the certificate 7 5.2 Changes of the products covered by the certificate 7 5.3 Suspension, cancellation, and withdrawal of the certificates 7 6 Use of compulsory product certification mark 7 6.1 The mark type permitted to use 8 6.2 Application of the mark 8 7 Charge. 8 APPENDIX 1 INFORMATION DOCUMENT OF MOTORCYCLE helmet FORCOMPULSORY CERTIFICATION 9 APPENDIX 2 Test items 11 APPENDIX 3 Requirements for Factory’s Quality Assurance ABILITY. 121 Scope This document applies to the products of motorcycle helmet 2 Definition The definition of motorcycle helmet sees GB 811-1998 Helmets for motorcycle users 3 Certification model Type testing + Initial inspection in the factory + Follow-up inspection 4 General requirements for certification 4.1 Application for certification 4.1.1 Classification of application unit The products made by different factories should not be in the same unit. The different configurations of the products should not be in the same unit. The products made of different materials should not be in the same unit. The different sizes of the products should not be in the same unit. 4.1.2 Application documents The documents of certification application see the Appendix 1. Type testing 4.2.1 The rules of sample delivery The sample should be delivered according