New Mexico FFA新墨西哥FFA.pptVIP

Slag or Chipping Hammer Used for slag removal from shielded electrode weld. Tip Cleaner Used to clean and partially recondition both welding and cutting tips. Torch Handle Used to mix fuel gasses and oxygen in the correct proportions. Tungsten Electrode Non-consumable electrode that generates the arc when TIG welding. Can be purchased in a variety of sizes. Vise Grip Welding Clamp With its flat and “U” shaped jaws, it is used to clamp metals quickly. Welding/Cutting Goggles Used to protect eyes from damaging light rays and heat rays that may prove destructive to eye tissue. Should not be used for arc welding. Welding Helmet Used to protect the eyes and face from the harmful arc rays and molten spatter produced when arc welding. Welding Tip Used for all types of oxy-fuel brazing and welding. Wire Brush Used to prepare metal for welding or cutting. Removes slag or rust . May be used to clean parts of machinery. New Mexico FFA Agricultural Mechanics Career Development Event Welding and Metal Working Abrasive Cut-Off Saw Abrasive saw blade material is used to cut metal. Acetylene Regulator Used to reduce the high acetylene cylinder pressure to a workable constant prssure. Hose and cylinder connections are left handed threads. Brazing Rod Used as a filler rod when braze welding. May or may not be flux coated. Copper Coated Mild Steel Welding Rod Used as a filler rod for mild steel oxy-fuel welding. The copper coating prevents rusting Cutting Torch Tip Used with a cutting torch handle when oxy-fuel cutting. The tip size is determined by the thickness of the metal. Cutting Torch Used with the cutting tip when oxy fuel cutting steel. Electrode A coated metal wire used for shielded metal-arc welding a variety of metals. Electrode Holder Used to mechanically hold the electrode while conducting current from the electrode lead. Flashback Arrestor Used to limit damage from a flashback by allowing the gases to flow in only one direction, preventing the flame from burning back