盾构出洞施工过程的管片内力实测分析.pdfVIP

第六届全国土木工程研究生学术论坛 清华大学 2008 盾构出洞施工过程的管片内力实测分析 1 2 1 杜进禄 ，陈勇 ，黄醒春 (1.上海交通大学土木工程系，上海200240 ；2.上海市第二市政工程有限公司，上海200065) 摘 要：与正常使用阶段相比，通用管片在施工阶段承受的荷载及相应的力学行为均有较大差异。 从工程经验可知，管片开裂多发生在施工阶段，因此对通用管片在施工阶段力学行为的研究尤为重要，对通 用管片优化设计也具有非常重要的意义。以上海市西藏南路越江隧道工程为背景，针对东线隧道+6 环在浅覆 土状态下并处于冻结加固区，管片容易碎裂、隧道易出现横鸭蛋形状等问题，对该管片环进行原位测试，获 取该环管片在施工过程中的应力和应变的变化特性。 关键词：通用管片；施工过程；原位测试；力学行为 Measurement of internal force of shield-drivern tunnel lining in the Outer Well Construction 1 2 1 DU Jinlu , CHEN Yong , HUANG Xingchun (1.Department of Civil Engineering, Shanghai Jiaotong University, Shanghai 200240, China； 2. Shanghai No.2 Municipal Engineering Co.，Ltd ，Shanghai 200065，China) Abstract: The loads and relative mechanical behaviors of segments are different between construction stage and regular service stage. The cracks usually appear in construction stage which hit the research on mechanical behavior of segments in construction stage more important and very important significance in the optimal design of general segments. Based on the project of the river-crossing tunnel of South Xizang Road, the in-situ testing was made in the +6 ring of the line east tunnel, where depth of soil above the tunnel is thin and the tunnel lies in frozen reinforcement area, there, the general segment is easy to be broken and appears duck egg-like shape.The value and distribution law of stresses and strains during the construction process were obtained. Key words: general segment; construction process; In-situ testing; mechanical behavior