一种采用斩波稳零技术的16位,96kHz带宽Σ-Δ AD转换器.pdfVIP

第28卷第8期 2007年8月 半导体学报 CHINESE JOURNAL OF SEMICoNDUCTORS Vol 28 No 8 Aug．，2007 A 16bit 96kHz Chopper-Stabilized Sigma—Delta ADC Ca0 Ying，Ren Tenglong，and Hong Zhiliang’ (StateKey Laboratory ofASIC＆Systems，FudanUniversity，Shanghai 201203，China) Abstract：A 16bit sigma·delta audio analog-to-digital converter is developed It consists of an analog modulator and a digital decimator A standard 2-order single-loop architecture is employed in the modulator．Chopper stabili— zation is applied to the first integrator to eliminate the 1／f noise．A low—power，area-efficient decimator is used， which includes a poly-phase comb-filter and a wave·digital-filter．The converter achieves a 92dB dynamic range o— ver the 96kHz audio band This single chip occupies 2 68mm2 in a 0 18“m six-metal CMOS procem and dissipates only 15 5mW power Key words：sigma-delta modulation；chopper stabilize；decimator；poly phase；wave digital filter；on·chip nolse EEACC：1250；1280 CLC number!TN432 Document code：A Artiele 1D：0253—4177(2007：)08—1204—07 1 Introduction The proliferation of mainstream consumer digital audio equipment has generated increasingly stringent requirements for high-performance ana· log．to．digital converters(ADC)used in the audio signal processing chain．Sigma—delta ADCs are the most popular converters for audio applications currently．Severnl 16bit converters have been de． veloped throughout the years，but they have always been restricted to the audio-frequency range，i．e． 20kHz．With the widespread use of stereo audio techniques．this range should be larger．96kHz is an optimal stereo audio—frequency range，and a converter with 16bit accuracy and 96kHz band． width is suitable for stereo audio applications This paper presents a low—power low--distor— tion audio ADC intended for the mainstream con— sumer audio market．It includes an analog modula— tor and a digital decimation filter．According to the simulation results，the converter achieves a dy— namic range greater than 98dB within a band． width of 96kHz