刀片相关网络技术04_319571_Integrity_BL8x0c_i2_Upgrade_Recovery_20-Jan-2012.pptxVIP

HP Integrity BL8x0c i2 Server Blades Upgrade and Recovery Rev.12.11 HP Integrity Server Blades L200 Service and Support Module objectives Describe how to upgrade a HP Integrity BL8x0c i2 server blade Describe how to recover a HP Integrity BL8x0c i2 server blade after a blade replacement Server Blade Upgrade System upgrade – overview The following upgrade option kits are available: Three Upgrade BL2 Blade Link (BL) options result in an Integrity BL870c i2 server blade Two Upgrade BL4 Blade Link options result in an IntegrityBL890c i2 server blade The following minimal firmware requirements must be installed before you can upgrade a system Server blade: 21.08, or later OA: 3.21, or later VC (as applicable): 3.15, or later The OS may need to be reinstalled on the final upgraded system (a new OE license may be required) Adding new Upgrade blades to an enclosure might require additional power supplies This is reported by the OA For more information, see the c3000 or c7000 enclosure setup guides After an upgrade, the removed BLs cannot be reused Each Blade Link kit includes a new product number label to attach to the system label carrier System upgrade methods The Upgrade blade (AM360A) may or may not be ordered Upgrade blades should be pre-installed with ordered processors, memory, and other components Addition—Adding another blade(s) to an existing system Existing BL860c i2 + BL2 + AM360A = BL870c i2 Existing BL870c i2 + BL4 + 2 x AM360A = BL890c i2 Existing BL860c i2 + BL4 + 3 x AM360A = BL890c i2 Combination—Combining existing systems together Existing 2 x BL860c i2 + BL2 = BL870c i2 Existing 2 x BL870c i2 + BL4 = BL890c i2 (There are multiple ways to ‘combine’ blades as long as the resulting combination = 4 blades.) Conversion—Used to move an existing system to another slot or to another enclosure (the upgrade is required first due to slot spacing differences) This is needed when switching between the c7000 and c3000 enclosures, or when adding or removi