刀片相关网络技术AppB_319571_Integrity_BL8x0c_OS_Install_20-Jan-2012.pptxVIP

  • 4
  • 0
  • 约5.41万字
  • 约 138页
  • 2017-04-07 发布于浙江
  • 举报

刀片相关网络技术AppB_319571_Integrity_BL8x0c_OS_Install_20-Jan-2012.pptx

HP Integrity Server Blades L200 Service and SupportHP Integrity BL8x0c i2 and Legacy Server BladesAppendix B: Operating System InstallationRev.12.11Operating system installationThis appendix describes the installation procedures for the following operating systems:HP-UX cold install using HP Ignite-UXHP OpenVMSMicrosoft Windows Server 2008Linux (Red Hat Enterprise Linux and SUSE Linux Enterprise Server)Installing HP-UXPreparing to install HP-UXCollect the required information about the system:Network informationHost nameSystem IP addressSubnet mask addressGateway addressDomain nameDNS addressMiscellaneous informationRoot disk path and root swap spaceFile system type – LVM with VxFS or whole disk with VxFSRoot disk volume group disks – how many disks to place in the root disk volume groupPhysical location for SAS disks – enclosure and bay numberWWID for Fibre Channel (FC)WWID for Fibre Channel Virtual Connect (VC)Additional software to be installedHP-UX cold installation processInstall HP-UX 11i v3 OS/OE from local media or using Ignite-UXInstall additional non-OEapplications using swinstallUsing tools from HP Support Center, identify and install additionally needed patchesInstall third-party andinternal softwareCreate recovery imageInstalling HP-UX from DVD mediaFollow these steps to install the HP-UX operating system from an external DVD/CD-ROM:Connect an external DVD/CD-ROM drive to your server blade.Turn on the USB DVD/CD-ROM drive and insert the first DVD of the HP-UX 11i v3 OE DVD set into the drive.From the EFI Boot Manager menu, select EFI Shell [Built In].At the EFI shell prompt, specify the device name (for example, fs1:) for the DVD/CD-ROM drive and enter the EFI install command.For example:Shell fs1:fs1:\ installNOTE: The fs number for the CD file system may depend on the number of file system partitions present.If you do not see the DVD/CD-ROM drive, use the EFI map -r command to list all the device names from the EFI shell prompt. The list of devices d

文档评论(0)

1亿VIP精品文档

相关文档