内燃机设计课程设计说明书 陈崇.docxVIP

内燃机设计课程设计说明书机械与动力工程学院 热动10-3班 学号：1003120325 陈崇基本参数5130柴油机（四冲程非增压）S=130,n=2100连杆长度：270mm活塞连杆质量比：0.85/1.25130型柴油机热计算程序和计算结果#include graphics.h#include conio.h#include dos.h#include stdio.h#include math.hvoid draw(n1,Pa,s1,n2,Pb,l,p,Pz)float n1,Pa,s1,n2,Pb,l,p,Pz;{float k,j;int gdriver,gmode,i,x,y,r,L=500,B=50,u,z;gdriver=DETECT;initgraph(gdriver,gmode,);setbkcolor(15);setcolor(8);cleardevice();line(20,55,20,410);line(20,410,600,410);line(20,55,17,65);line(20,55,23,65);line(600,410,590,407);line(600,410,590,413);gotoxy(2,4);printf(p);gotoxy(2,5);printf(/);gotoxy(2,6);printf(Ma);k=(float)(L/s1);u=L;z=(int)(B*Pa);gotoxy(1,2);printf(map1-1 5130);x=L;r=(int)(B*Pa*pow((float)L/x,n1));u=x;z=r;for(x=L;x=(int)(k);x--){r=(int)(B*Pa*pow((float)L/x,n1));line(u,400-z,x,400-r);u=x,z=r;}line(x+1,400-r,(int)(p*L/s1-1),(int)(400-B*Pz));j=(float)(L/l);u=L;z=(int)(B*Pb);moveto(505,415);outtext(V*10e-4/(m*m*m));y=L;r=(int)(B*Pb*pow((float)L/y,n2));u=y;z=r;for(y=L;y=(int)j;y--){r=(int)(B*Pb*pow((float)L/y,n2));line(u,400-z,y,400-r);u=y;z=r;}gotoxy(6,4);printf(z);moveto(505,375);outtext(b);moveto(25,250);outtext(c);moveto(505,400);outtext(a);arc(L,400-(int)(B*(Pa+(Pb-Pa)/2)),270,450,(int)(B*(Pb-Pa)/2));getch();closegraph();}main(){float Hu=42705,D=130,S=145,N=2100,gc=0.86,gh=0.13,go=0.01;float Pz=6.0,a=1.6,sz=0.70,sb=0.85,Rr=0.03,Tr=750,Qm=0.84,s=16,P0=0.09,T0=293;float T1=10,sc=1.11,a2=19.26,b=0.0025,o=0.98;float Ta,Pa,Qv,n1,n2,m,n,Tc,Pc,L0,L,gi,B,B0,Xz,Bz,Cvpmx,Cppmx,Cvpmc,Cvpmz,Cvpmb,Cv1,Cv11,Cv2,Va,Tz,Tb,Tk,k,l,Pb,Pk,Pi1,Pi,Qi,Pmi,ge,Qe,Pe,Cm,Hu1,Cppmz,p,Bb;printf(**************************\n);Ta=(T0+T1+sc*Rr*Tr)/(1+Rr);Pa=0.88*P0;Qv=s*T0*Pa/((s-1)*Ta*P0*(1+Rr));printf(Ta=%fK\n,Ta);printf(Qv=%f\n,Qv);n1=1.32;do{m=n1;n1=1+8.315/(a2+b*Ta*(1+pow(s,(m-1))));}while(fabs(m-n1)0.0001);printf(n1=%f\n,n1);Tc=Ta*pow(s,n1-1);Pc=Pa*pow(s,n1);L0=(gc/12+gh/4-go/32)/0.21;L=a*L0;B0=1+0.0639/a;B=(B0+Rr)/(1+Rr);Xz=sz/sb;Bz=1+(B0-1)*Xz/(1+Rr);printf