汽车纵梁冲孔生产线上的上料装置研究.doc

PAGE 46 摘 要 随着科技的进步，工业领域的自动化程度越来越高，作为机械行业，肩负着国家制造业的兴衰，也是衡量一个国家综合国力的主要标志。目前，在机械加工生产线上多数采用的是电、气、液相结合的一体化模式。板材送进装置是生产线上的重要环节，是连接主机和工作机的桥梁。本文讨论了汽车冲孔生产线上的送料装置的结构组成和工作原理，简单介绍了汽车冲孔生产线的发展状况、组成部分及其用途，并且在此基础上进行了改进，实现了板材的快速、准确定位。因此，成功设计该装置具有十分重要的意义，它可以在一定程度上促进生产自动化，减少运输时间，降低工人的劳动强度，提高生产效率，降低劳动成本，给企业带来更大的经济效益。 关键词：夹钳；上料装置；板材；冲孔 Abstract With the advances in technology, the high degree of automation of the industrial areas of the shoulder as the machinery industry, the rise and fall of national manufacturing is the main indicator to measure a countrys comprehensive national strength. At present, the majority used in the machining production line integration mode is a combination of electricity, gas and liquid. Sheet sent to the device is an important part of the production line, is a bridge to connect the host machine. This paper discusses the structure and working principle of the car punching production line feeding device, briefly introduced the development of automotive punching production line, part of their purpose, and on this basis has been improved, and plate rapid accurate positioning. And the clamp device is an ongoing job for a long time, we have to study it. Therefore, the successful design of this device has great significance to a certain extent, it can promote the production automation, reduce transit time, reduce labor intensity, increase productivity, reduce labor costs and bring greater economic benefits to the enterprise. Key words: Clamp; Feeding device; Sheet; Punching 目 录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc326836692 摘 要  PAGEREF _Toc326836692 \h I  HYPERLINK \l _Toc326836693 Abstract  PAGEREF _Toc326836693 \h II  HYPERLINK \l _Toc326836694 第1章 绪论  PAGEREF _Toc326836694 \h 1  HYPERLINK \l _Toc326836695 1.1 汽车纵梁冲孔生产线上的上料装置研究的意义  PAGEREF _Toc326836695 \h 1  HYPERLINK \l _Toc326836696 1.2 汽车纵梁冲孔生产线的国内外发展情况  PAGEREF _Toc326836696 \h 1  HYPERLINK \l _Toc326836697 1.2.1 国外情况  PAGEREF _Toc326836697 \h 1  HYPERL