CRM materials market positioning and target market analysis.docVIP

 PAGE \* MERGEFORMAT 5 CRM materials market positioning and target market analysis CRM material market position as follows: high-strength, high-performance concrete, and precast concrete products factory, road concrete, hydraulic concrete. The first phase of market position as follows: precast concrete batching plant and the product. Extensive use of CRM, construction will result in higher benefits, especially in the following areas: hydraulic concrete: Hydraulic concrete, mostly large volume and high-strength concrete, in order to obtain a higher strength, lower heat of hydration and increase liquidity. In general, when mixing and concrete mixing 15% ~ 20% of fly ash, 0.7 ~ 2% of superplasticizer or powder, but the fly ash will bring about several aspects: first, fly ash will reduce the early strength of concrete, resulting in poor early cracking; followed by the quality of fly ash is difficult to stability (fineness and carbon content), a gray either produced or used in areas which are relatively small; the same time, the poor quality of With the increase of dosage of fly ash, which anti-freeze-thaw durability of violent reduced; fly ash concrete shrinkage large, is also an obvious defect; the durability of anti-carbonation is also of great concern. CRM material has a very good water reducing performance, can be said that ‘mineral superplasticizer’ chemical superplasticizer than superior, not only significantly increased the density of concrete, but also did not like chemistry superplasticizer of the concrete slump loss is very heavy, such as silica fume did not have a high water demand, while its lower heat of hydration, improve anti-cracking ability, reduce and avoid cracks, reducing the physical, chemical, a variety of damaging effects, enhance the durability and many other areas have a unique role. CRM raw material is mainly water, crushed blast furnace slag, its mineral composition is very stable, the production process used by the modified rear sectio