Drip infusion on the proposed traffic and drop coefficient.docVIP

 PAGE \* MERGEFORMAT 12 Drip infusion on the proposed traffic and drop coefficient [Keywords:] drip infusion drip flow coefficient Intravenous infusion therapy is the most commonly used clinical drug, a drug delivery technology operations. The speed of infusion has been wrong to use the term “drip rate”, “infusion rate” or “infusion rate” the amount of name expression, the number of drops per minute the unit to measure, that is, “gtt / min” or “drops / min”. An infusion flow rate and infusion rate (rate) In physics and fluid dynamics, flow and volume flow rate are two different names, different definitions, units are not the same. Fluid flow in the pipe, the flow speed and the amount of fluid flow, the amount of the name of the “flow” and “flow” to express. Unit time through a section of pipe is called the amount of fluid flow. If the fluid volume with the volume measure, referred to as “volume flow” was defined as qv = v / t, the international unit m3 / s; if the amount of fluid with quality metrics, known as “mass flow” was defined as qm = m / t, international units of kg / s. national standard GB3102 · 3-93 in a collection of “mass flow” and “volume flow” of two quantities and units, see Table 1. Table 1 national standards on traffic, speed the amount of names, symbols, definition, unit name, symbol of the provisions of No amount of national standard definition of Name Symbol Name Symbol GB3102.3 93 qm quality mass flow rate through a surface per kilogram kg / sGB3102.3 93 qv volume volume flow rate through a plane cubic meters per second m3 / sGB3102 .1 of 93 meters per second velocity vv = dsdt m / s “Flow” is defined as “the fluid in unit time high in the flow direction over the distance” units “m / s”. It is the relationship with the flow: Flow = velocity × cross-sectional area In GB3102 · 1 93, the “speed” of this volume, definitions, unit names and symbols in Table 1. Speed #8203;#8203;dimension is “L T-1”, the “distance / t