pH - Conductivity - Ion Tester fluoride content in urine.doc

 PAGE \* MERGEFORMAT 6 pH / Conductivity / Ion Tester fluoride content in urine [Abstract] Learn SevenMulti type pH / Conductivity / Ion Tester is available for the determination of urinary fluoride content, refer to “urine fluoride ion selective electrode determination of” fluoride electrode in conjunction with the apparatus and operating instructions. Results The precision of the method (RSD = 1.01% ~ 3.51%) and accuracy (recoveries of 95.0% to 104.0%) test results are reliable, easy to operate, fast, precision and accuracy and good . SevenMulti type pH / Conductivity / Ion Tester can be used to determine urinary fluoride, and the method is simple, fast and reliable. [Keywords:] fluoride ion selective electrode fluoride concentration of urine F SevenMulti type pH / Conductivity / Ion Tester is used to measure pH, conductivity and ion concentration of the function. Coupled with ion concentration measurement module, F-Electrode-K2 LE302 fluoride electrode and reference electrode can be easily Rapid measurement of aqueous solution or organic solution in water fluoride concentration, but has yet to see reports of fluoride in urine. This paper aims to understand the instrument testing the effectiveness of fluoride content in urine. 1 Materials and methods 1.1 Instrument SevenMulti type pH / Conductivity / Ion Tester (with the ion concentration measuring module), F-Electrode-K2 fluoride ion electrode, LE302 reference electrode (Instrumentation and electrodes are on the Haimeitele - Toledo Instruments Co., Ltd. production), electromagnetic stirrer, urine specific gravity meter. 1.2 Reagents [1] 1.2.1 The total ionic strength buffer solution (TISAB): Weigh 58.0g of sodium chloride, 0.3g sodium citrate, dissolved in the pre-acetic acid plus a 57mL 500mL of ice water, then 5mol / L NaOH (about 150mL) adjust the solution pH to 5.25, and finally add water to 1L. stored in polyethylene plastic bottles. 1.2.2 Simulation of urine: dissolve 11.6g of s