磁性材料SMC PPT.pptVIP

Shen Hongxian and Hao Peng Materials Science and Engineering. SEM for Ferrite NiZnFe2O4 Materials Science and Engineering. Materials Science and Engineering. Magnetic Properties of Ferrites Materials Science and Engineering. Field (Gs) Moment/Mass emu/g Materials Science and Engineering. Field (Gs) Moment/Mass emu/g No Heating 未加热 Hard Ferrites Materials Science and Engineering. Field (Gs) Moment/Mass emu/g Heat at 500℃ 加热到500℃ 保温2h Materials Science and Engineering. Field (Gs) Moment/Mass emu/g Heating at 700 ℃ 加热700摄氏度保温2h Materials Science and Engineering. 参数 0 500 700 Hc T 矫顽力 cocercivity 0.01147 0.016553 0.00864 Ms A/m 饱和磁化强度 magnitization 292.29 323.922 100.884 Mr A/m 剩磁 retentivity 111.15 118.422 39.6516 B@4000A/m 1.42T B@10000A/m 1.66T Hc 205A/m μ-max 670 B H m=B/H Soft，500℃ 0℃ 500℃ 700℃t TGA of BaFe12O9 Materials Science and Engineering. Resistivity of BaFe12O9 Layered Double Hydroxides Synthesis Steps for Layered Double Hydroxides (LDH) Formation Materials Science and Engineering. 双层氢氧化物 The most common method to prepare LDHs is by co-precipitation of metallic salts with a concentrated alkaline solution. （通用制备方法：金属盐在浓缩碱溶液中的共沉淀） Requires prolonged hydrothermal treatments that increase the cost. Enormous amounts of water are required to wash the final products. 缺点：热处理时间长，耗费水比较多 Materials Science and Engineering. Continuous production of LDHs by an in-line dispersion-precipitation method It employs an alkaline solution to precipitate the metallic salts, the purification and handling problems are not avoided.（用碱溶液就无法避免洗涤和提纯的步骤。） Another approach was the preparation of LDHs using metal oxides/hydroxides（金属氧化物/金属氢氧化物） It required long aging times and the final products contained, among other phases, also need to adjust the pH （需要的时间较长，适当的调整pH，可以直接过滤 干燥） Materials Science and Engineering. 　 前密度 前电阻率 后密度 电阻率 shx700Mpa试件 6.983532461 0.305992215 6.424200692 0.00011 shx900Mpa试件 6.717985697 0.542749314 6.712408754 0.0