出口界限包含下列十种形式(国外英文资料).docVIP

出口边界包括下列十种形式(国外英文资料) FLUENT? The entry and exit borders include the following ten forms:? (1) speed entry condition: the value of a given velocity and other scalar properties at the entry boundary. ? (2) the pressure entry condition: the value of the total pressure and other scalar variables at the inlet boundary. ? (3) quality flow conditions: when calculating the compressible flow, the mass flow at the given entrance. Because the density of incompressible flow is constant, so dont have to be given when calculating the incompressible flow mass flow conditions, as long as a given can determine the mass flow rate conditions. ? (4) pressure export conditions: used for the value of the static pressure and other scalar variables at the outlet of the flow field. Defined at the exit exports (outlet) conditions, rather than define flow (outflow) conditions, because the former is more easy to convergence in the iterative process, especially in case of return. ? (5) the pressure far field condition: this type of boundary condition for the free flow of a given compressible flow boundary condition, namely in a given free stream Mach number and static parameters is determined, given the pressure condition of infinity. This boundary condition can only be used for compressible flow calculations. ? (6) flow boundary condition: if the pressure and speed are not determined before the calculation is completed, the flow condition can be used. This boundary condition applies to the fully developed flow field, which is set to zero for all flow parameters except pressure. This boundary condition is not applicable for compressible flow. ? (7) entrance ventilation conditions: the setting of this boundary condition requires the given loss coefficient, flow direction, total pressure and total temperature of the environment. ? (8) intake fan conditions: at the entrance to assume that the presence of suction fan, can set the pressure jump with this kind of boundary condition, flow direction,