radioss接触非线性分析.pdf

OS-1365: NLSTAT Analysis of Solid Blocks in Contact file:///F:/Altair/13.0.0.81/help/hwsolvers/rd-2100_nlsta... HyperWorks Solvers The purpose of this tutorial is to demonstrate how to carry out nonlinear implicit small displacement analysis in OptiStruct, involving elasto-plastic materials, contact and continuing the nonlinear solution sequence from a preceding nonlinear loadcase. Model and Loading Description Figure 1 illustrates the structural model used for this tutorial: Two square solid blocks made of elasto-plastic steel material. The dimensions of the blocks and the material parameters can be obtained in the table below. In the first nonlinear subcase, pressure loading is be applied to the top solid block, the top corners of which are constrained in X and Y directions. The top solid is in contact with the bottom solid, the bottom corners of which are constrained in X, Y and Z directions. The second nonlinear subcase is to simulate the un-loading and is a continuation of the nonlinear solution sequence from the previous loading subcase. Figure 1. Model and Loading Description Units Length: mm; Time: s; Mass: Mgg; (Force: N; Stress: MPa) Top block 72 mm x 72 mm Bottom block 100 mm x 100 mm Thickness of 20. mm blocks Material Steel, Elasto-plastic 第1页 共10页 2014/5/8 10:02 OS-1365: NLSTAT Analysis of Solid Blocks in Contact file:///F:/Altair/13.0.0.81/help/hwsolvers/rd-2100_nlsta... Initial density ( ): 7.90e-9 kg/mm3 Youngs modulus (E): 210000 MPa