郭天祥十天学会PIC单片机笔记.docVIP

配套的芯片是PIC16F877 第一讲PIC单片机简介、软件使用方法、新建工程、软件调试、流水 #includepic.h __CONFIG(0x3B31); void main() { /*点亮第一个LED灯（总线操作）*/ TRISD=0xfe;/设置RD0为输出 PORTD=0x01;/设置RD0输出1 /*点亮第三个LED灯（位操作）*/ TRISD2=0;//对RD2进行操作 RD2=1; while(1); } 流水灯 #includepic.h #define uchar unsigned char #define uint unsigned int __CONFIG(0x3B31); void delay(uint x) { uint a,b; for(a=x;a0;a--) for(b=110;b0;b--); } void main() { uchar i; TRISD=0x00; while(1) { PORTD=0x01; for(i=8;i0;i--) { delay(500);//延时500ms PORTD=PORTD1; } } } 数码管的静态显示与动态显示原理及实现 数码管的动态显示（位选是用达林顿反相驱动器控制的，要选通哪个数码管就给相应的IO口赋1） #includepic.h #define uchar unsigned char #define uint unsigned int __CONFIG(0x3B31); //uchar code table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07, //0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71}; void delay(uint x) { uint a,b; for(a=x;a0;a--) for(b=110;b0;b--); } void main() { TRISA=0; TRISD=0; while(1) { PORTA=0x20;//0010 0000 PORTD=0x06;//显示1 delay(1); PORTA=0x10; PORTD=0x5b;//显示2 delay(1); PORTA=0x08; PORTD=0x4f;//显示3 delay(1); PORTA=0x04; PORTD=0x66;//显示4 delay(1); PORTA=0x02; PORTD=0x6d;//显示5 delay(1); PORTA=0x01; PORTD=0x7d;//显示6 delay(1); } } 第三讲 PIC单片机独立键盘检测原理及实现#includepic.h #define uchar unsigned char #define uint unsigned int __CONFIG(0x3B31); //uchar code table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07, // 0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71}; void delay(uint x) { uint a,b; for(a=x;a0;a--) for(b=110;b0;b--); } void init() { TRISB=0xff;//B端口全为输出 TRISD=0; TRISE0=0; RE0=0; PORTD=0; } void didi(uchar num) { uchar di_num; for(di_num=num;di_num0;di_num--) { RE0=1; delay(50); RE0=0; delay(20); } } void scan() { if(RB0==0) { delay(10); if(RB0==0) { didi(1); while(!RB0); PORTD=0x01; } } if(RB1==0) { delay(10); if(RB1==0) { didi(2); while(!RB1); PORTD=0x02; } } if(RB2==0) {