保温时间对置氢钛合金超塑变形组织的影响.pdfVIP

Vol.15 No.1 第 15 卷第1 期 号也性 A枝哮粮 Feb. 2008 2008 年 2 月 JOURNAL OF PLASTICITY ENGINEERING 保温时间对置氢钦合金超塑变形组织的影响 (北京科技大学材料科学与工程学院，北京 100083) 张宗尧1 任学平6 (北京航空制造工程研究所，北京 100024) 五耀奇2 侠红亮3 李晓华4 李 红5 摘 要:文章通过高温拉伸实验和扫描电镜观察，研究了保站在时间对景氧TC4合金超塑流动特性及其组织的影响， 锚合高温组织和敏氢柑阻分析了影响机制。研究表明，合适的氢含量及合理的保温时间可以使组俱发生动态再结 晶井得以细化，有利于提尚丁C4 含金的趟理性。置氢丁c4合金的姐塑变形的最佳工艺参数为，超塑变形的温度为 3 840.C ，保据1时间为 25min，应变速率为1O- s叶，氮含量为 0.3%。 提键词: TC4含金F 景氧;超额变形 中圄分拨号:丁G113.1 文献标识码:A 文章编号: 1007-2012 (2008) 01-0084-04 Effect of holding time on high temperature microstructures of hydrogenation TC4 alloy before superplastic deformation ZHANG Zong-yao 1 REN Xue-ping6 (School of Materíals Science and Engineering , University of Science and Technology , Beijing 100083 China) WANG Yao-qi2 HOU Hong-lian旷 LI Xiao-hua4 LI Hont CBeijing Aeronautícal Manufacturing Technology Research Institute , Beijing 100024 China) Abstract: Effect of holding time on the deformation behavior and high temperature microstructures of hydrogenation TC4 alloyat high temperature has been investigatecl using tensíle tests and SEM technology. The effect mechanism has been analyzed through high temperature microstructures and T七H phase diagram，丁he experimental results show that: 1) proper hydrogen content in T C4 alloy and proper holdi昭 time could cause high temperature microstructures of TC4 alloy to facilitate the dynamic recrystalli- zation , refine high temperature microstructures and improve the superplasticity of TαalloYJ 2) the optimal p