投《矿冶工程》，定稿后发给艾光华看看。-有色金属科学与工程.doc

钨矿石磨矿动力学研究 鄢发明1，艾光华1，吴彩斌1，李晓东2，石志中2，毛文明2 （江西理工大学江西省矿业工程重点实验室，江西赣州341000423037）摘要：建立磨矿产品粒度指导选矿厂磨矿本文在实验室条件下对柿竹园钨矿石进行不同磨矿时间的分批磨矿试验。，矿粒在0.1mm符合一阶磨矿动力学，0.1mm以上粒级符合n阶磨矿动力学。呈幂函数动力学方程为R=R0exp[-(0.01442+9.53865d1.76128)t]呈呈对数动力学方程为R=R0exp［-(-0.1341+1.15142d0.68169)t0.71818-0.38656lnd］建立的磨矿动力学方程计算的理论值与磨矿实际结果吻合程度较高，为选矿厂通过调节磨机给矿量分级机返砂量来控制磨矿产品粒度奠定理论基础。关键词：钨矿石；磨矿动力学；粒度分布Grinding kinetics on tungsten ores YAN Faming 1，AI Guanghua1，WU Caibin1，Jiangxi Key Laboratory of Mining Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China；2. Hunan Shizhuyuan Nonferrous Metals Metals Limit Corp, Chenzhou 423037 , China) Abstract: The mathematical model of product particle size distribution of grinding process is established and predicted, which will be to?the?benefit?of guiding mill grinding. This paper made batch grinding experiments on Shizhyuan tungsten ores in different grinding time in the laboratory. The results show that particles conform to first order grinding kinetics when the particle size is no more than 0.1 millimeter, however, the particles conform to n order grinding kinetics when the particle size is more than 0.1 millimeter. There is a power function relationship between the parameter k of first order grinding kinetics and diameter d, which distributes in function of R=R0exp[-(0.014 42+9.53865d1.76128)t]; at n order grinding kinetics, the parameter k and diameter d are consistent with power function relationship, and the parameter n and diameter d are consistent with logarithmic function relationship, which distributes in function of R=R0exp［-(-0.1341+1.15142d0.68169) t0.71818-0.38656lnd]. Through the?comparison?with?theoretical values which are calculated by grinding kinetics equations with the grinding actual results,?actual?values?have?high degree?of?coincidence?with it. Therefore the study establishes a theoretical basis for controlling the grinding product particle sizes by adjusting the feed quantity of mill and sand return of grader. Key wor