通用ATE中总线信号资源的通用化描述方法.pdfVIP

ìt算机测锺与控制.2010.18(6) • 1240 • Computer Measuremenl Conlrol |自动化那试| 文章编号:1671ω4598(2010)叫 1240 … 01 咿图分吉隆号: TP311 文献栋t只码:人 通用 ATE 中总线信号资源的通用化描述方法 索价，盖使民， Li 绊 (北京航空航天大学仪器科学与光也正程学院，北京 100083) 摘要:信号资源的标准化是实现八丁E 软件平台通用校的前提;基于信号接口的 GPATE 设计方法将测试资源分成测最信号、激励信 号和总线信号二三类;与测最信号和激励信号不同，总绞信号的协议主在街多样做.因此为总统信号资源建立通用的模刻就gH导十分3重要。 文中钊对 GPATE 总线信号的特点，建立了一种总线协议的标准化模型，将总线协议模型分为数据包模型和数据帧模型分别进行描述， 该模型挺可以方便地实现总线发送敖攒的打包或解包操作3 设计和开发丁相应的协议配置士具，能方便、有效地实现基于各种总线的自动 测试系统的协议配置;协议自己jI采用 XML 文件进行存储@ 关键询:通用内动测试系统 (GPATE); 测试资源;依号绥口 Standardized Description of Bus Signal Resource for GPATE Song Qing , Meng Xiaofe吨， Wang Guohua (School of lnstrument Science and Opto -- electronics Engineerin臣， Beijing Uníversity of Aeronautícs and astronautícs , Beijing 100083 , China) Abstract , Standardìzed descriptìon of signal rcsources is a precondítíon of realizìng thc GPATE software platform. The design of GPATE bascd on sìgnal interface separates test resources into three groups , test signal , stimulalion signal and bus signal. Unlìke t剧t signal and stímulation si日nal. bU5 signal contaìns a variety 01 protocols that makcs building a general model for it crucìa l. In this article. a standard ized model of hus prolocol was developed according to the characteristics 01 bus signal. It was dcscribcd in two categorie筒， namely data pack modcl and dat8 frame model.丁he bus protocol model can makc it casy 10 pack or unpack the data. A configuratíon tool was created \0 con- figure the protocol of any kind of bus in a GPATE conveniently and effectìvcly. Thc configurations of protocols were stored in XML files. Key words , GPATE; t