铜冶炼气流干燥过程的混合气专家系统设计.pdfVIP

计算机测量与控制.2007.15(6) • 722 • Computer Measurement Control 文撒编号:1671 币 4598( 2007 )06 - 0722ω04 中回公类号:TP182 文曲曲标识码:A 铜冶炼气流干燥过程的混合气专家系统设计 革 S施，贺~牢 (中南大学倍息科学与工程学院，湖南长沙 410083) 摘姿:针对气流干燥过稳中水分难以稳定和充人→定最氯气后导致的操作人员人身安念问题，自现场生产工艺结合长期积累的专家 级验知识，设计了…个氯气和稀释风的混合气专家系统$根据实际生产过程，提出了其产生式规则的知识表示形式，设计了气流干燥系 统的专家知识库，通过.íE向推理机制，实现了专家系统的优化控制，实际应用表明，原计日消耗氯气最降低了1. 1% ，并且能确保周转 窑内精矿不着火，既稳定了生产，又保障了工人的人身安全，具有工程实用性。 关键词:气流干燥;专家规则g 知识库;按现机 Gas Mixture 配xpert System of Pneumatic Drying in Process of Copper Smelting Wang Wei. He Jianjun CCollege of Information Science and Engineering , Central South University , Changsha 410083 , China) Abstract , Considering the stability of bumidity and personal safety after the ìnput of nitrogen in pneumatic drying , combine with the accumulative knowledge from experts , a mixture of nitrogen and dilute wind expert system is put forward. According to the actual produc tion process , the knowledge expression form of production rule was brought up. an expert knowledge bllse of pneumlltic drying was de- signed , and through the forward reasoning mechanism the optimized control of expert system wa5 realìzed. The actual applications show that the nitrogen is decreased by 1. 1%. the system can make sure the copper mìne could not catch fìre , it can a150 stabilize the production IInd guarantee the workers securìty , indìcating that the project has the engineering practicabìlity. Key words: pneumatic drying; expert ru1e; knowledge base; inference engine 慧。该方法有如下不足， (1)窑头温度和干矿水份的关系是根 。 引窗