在LS-Prepost建立sph模型的详细过程.docx

LS_Prepost关键操作模型建立立方体模型球体模型圆柱体模型圆台/锥模型参数定义*DATABASE_FORMAT计算结果输出格式IFORMOutput format for D3PLOT and D3THDT filesEQ.0: LS-DYNA database format (default),EQ.1: ANSYS database format,EQ.2: Both LS-DYNA and ANSYS database formats.IBINARYWord size of the binary output files (D3PLOT, D3THDT, D3DRLF andinterface files for 64 bit computer such as CRAY and NEC.EQ.0: default 64 bit format,EQ.1: 32 bit IEEE formatRemarks:1. This option is not available for every platform. Check LS-DYNA Banner upon executionof the program2. By using this option one can reduce the size of the binary output files which are createdby 64 bits computer such as CRAY and NEC.二进制*DATABASE_EXTENT_BINARY结果输出控制NEIPHNumber of additional integration point history variables written to thebinarydata- base for solid elements. The integration point data is writtenin the same order that it is stored in memory-each material model has itsown history variables that are stored. For user defined materials it isimportant to store the history data that is needed for plotting before thedatawhich is not of interest.给实体单元增加附加综合的点历史变量二进制数据库，综合点数据目的是储存记忆每个材料模型使它拥有自己的历史变量。对于使用者而言，定义材料对于储存历史数据是很重要的，在数据储存前需要对其进行描绘。NEIPS Number of additional integration point history variables written to thebinarydata- base for both shell and thick shell elements for eachintegration point, see NEIPH above.给薄壳和厚壳单元增加附加综合的点历史变量二进制数据库，看下面的NEIPH。MAXINTNumber of shell integration points written to the binary database, seealso *INTEGRATION_SHELL. If the default value of 3 is used thenresults are output for the outermost (top) and innermost (bottom)integration points together with results for the neutral axis. If MAXINTis set to 3 and the element has 1 integration point then all three resultswill be the same. If a value other than 3 is used then results for the firstMAXINT integration points in the element will be output. Note: If theelement has an even number of integration points and MAXINT is notset to 3 then you will not get mid-surface results. S