涉外自立式钢烟囱设计计算.pdfVIP

热能动力工程 第 25 卷增刊 Vo1.25 ,Supp. 2010 年6 月 JOURNAL OF ENGINEERING FORπIERMAL ENERGY AND 问WER ]un. ,2010 文章编号:1∞1-2仪;0(2010)增-0039-崎 涉外自主式钢烟囱设计计算 程东梅，邱长华 (哈尔滨工程大学机电学院，黑龙江哈尔滨 15创肌) 摘要:以某涉外自立式钢炯肉设计项目为例，详细讨论了涉外项目需要庄意的问题即中外规范的差异，及如何 依据UBC97 规范和中国规范进行基本风速及水平地震影响系数的换算:论述了自立式钢炯囱设计时除需验算 了横风向风振对结构的影响，采取适当措施避免横风向风振对结构的破坏;在地震区还应考虑钢烟囱截面的抗 震性能;在设计炯囱地脚锚栓时，应在最大设计弯矩下计算锚栓的数量和直径，保留一定的安全余量，确保结构 的安全性和可靠性。 关键词:自立式钢烟肉，风速换算，UBC97 ，风振 中圄分类号:TK223.28 文献标iR码:A Design and Calculation of a Foreign-related Self-support Type Steel Smoke Stack CHENG Dong-mei , QIU Chang-hua (College of Electromechanical Engineering, Harbin Engineering University , Harbin, China, Pωt Code: 15∞01) A恼优配t: Wi由 a foreign-rela时回lf-support steel smoke stack design project 盹凹ing as an example, discussed in detail were the matters meriting attention in foreign-related projects and differences between the Chine配皿d foreign codes as well as how ωconvert the basic wind speed and horiwntal seismic influencing factor according to UBC 97 and Chinese codes. Described were 由e measures properly taken to avoid destruction to the structures resulting from 由e lateral-wind -cau回d vibration apart from a checking calculation of the influence of the above vibration on the structures when designing a self.→up阳Irt steel smoke stack. In a seismic region , the earthquake-resistant performance of 由ecro髓盹ction of 由e st回1 smoke stack shall also be taken into account. When the foundation bolts of the smoke stack are designed, the number and diameters of the bolts