盘式永磁涡流驱动器解析建模和分析.pdf

2017 年 1 月 电 工 技 术 学 报 Vol.32 No. 2 第 32 卷第 2 期 TRANSACTIONS OF CHINA ELECTROTECHNICAL SOCIETY Jan. 2017 盘式永磁涡流驱动器解析建模和分析 1 1 1 2 时统宇 王大志 石松宁 张光儒 （1. 东北大学信息科学与工程学院 沈阳 110004 2. 国家电网甘肃省电力公司电力科学研究院 兰州 730050 ） 摘要 在传动装置的分析与设计中，对于永磁或涡流类的设备而言，解析模型往往更加具有 机理性。利用基于等效磁路法建立的盘式涡流驱动器的解析模型，分析永磁涡流驱动器的各区域 磁导和漏磁，求解出气隙中的磁感应强度，进而推导出转矩公式，并分析各参数变量对于转矩变 化的影响。各解析结果分别与有限元法仿真和实验测量数据进行了比较，证明解析算法的合理性 和准确性，在盘式永磁涡流驱动器的优化设计和性能分析中具有十分重要的意义。 关键词：盘式永磁涡流驱动器 解析分析 等效磁路法 有限元法 中图分类号：TM144 Analytical Modeling and Analysis of Disk Type Permanent Magnet Eddy-Current Driver Shi Tongyu 1 Wang Dazhi 1 Shi Songning 1 Zhang Guangru2 （1. School of Information Science Engineering Northeastern University Shenyang 110004 China 2. State Grid Gansu Electric Power Research Institute Lanzhou 730050 China ） Abstract Analytical models are widely used in analysis and designing of many permanent magnet or eddy-current-based appliances by providing more mechanistic solutions. According to the equivalent magnetic circuit method, this paper established the analytical model of the disk type eddy-current driver. Magnetic flux leakage and magnetic conductivity of each part of disk type eddy-current driver were calculated firstly. Then the transmit torque was calculated, and the relationship between the torque and the parameters was carried out. The results after 3D corrections were compared with the results of finite element method and experimental data. F