1填空题谜底(国外英语资料).doc

1填空题答案 A, fills up the topic The steel structure under dynamic load shall be used for the use of steel with good overall performance. Cold hardening will change the performance of the steel, which will improve the strength of the steel and reduce the plastic and toughness. 3. Five mechanical performance of steel is a yield strength, tensile strength, elongation, cold bending properties and impact toughness. Too much oxygen in the steel will cause the steel to be hot and brittle. Steel contains too much sulfur, it will be hot and crunchy at high temperatures, and it will have a lot of phosphorous, and it will be cold and crunchy at low temperature. Aging hardening will change the performance of the steel, which will improve the strength of the steel and reduce the plastic and toughness. The strength of the steel in the vicinity of 250-degree C degree increases plasticity and tenacity, which is called the blue crispy phenomenon. The greater the impact toughness of steel, the stronger the steel resistance to brittle fracture. The steel plate number q235-bf, where 235 is the yield strength, and B means the quality grade is B, and F means the boiling steel. The three brittle of the steel is hot, crisp, crisp and blue. The strength of the steel in the vicinity of 250 degrees C degree increases plasticity and tenacity, which is called the blue crispy phenomenon. The principle of welding welding structure is to calculate the strength of weld metal to suit the strength of the mother material, and generally adopt the principle of equal strength. The steel contains elements C, P, N, S, O, Cu, Si, Mn and V, among which N and O are harmful impurities. The main indicator of the plastic properties of steel is elongation. The greater the reliability of the structure, the smaller the probability of failure. 16. Bearing structure of steel should have tensile strength, yield point, elongation and sulphur, phosphorus content limit of qualified guarantee, the welding structure is shoul