游泳池壁挂式过滤器(国外英文资料).docVIP

游泳池壁挂式过滤器(国外英文资料) Wall-mounted swimming pool filtration equipment Wall-mounted swimming pool water treatment equipment in recent years (or called machineroomless type) gradually popular, a lot of swimming pool water treatment system USES a wall-mounted equipment, no room, save the initial investment, construction cycle is shortened. Even some design units recommend wall hanging equipment to party a, and some standard pools are fully equipped with wall-mounted swimming pools. Wall-mounted devices are a big substitute for traditional equipment. Can wall-mounted devices really replace traditional equipment and become the main force behind the water treatment of swimming pools in the future? The filter method of circulating filtration system is used to make the water pump outlet and filter membrane. (or paper Yi filters). The sand filter, generally USES single layer or multilayer filter material filter (quartz sand, anthracite coal, activated carbon, etc.), generally USES the filtration rate of 30 to 45 m/H. The effect of water effect is the effect of water effect, the small particles cannot be filtered out. When filtering normally, the filter effect is remarkable. It is possible to keep the pool turbidity less than 5 (NTU) cleaning mode, which is used in the process of cleaning or changing the membrane, and the filter membrane will be replaced in less than a year. The operation is complicated and usually takes two people for half a day. Anti-flush, the advanced body system can adjust the flow direction and the system operation. Why are Because of using membrane filtration and different in pure water processing, the current hanging equipment used in the pump pressure can not meet the membrane filter in the true sense demand, so the wall in the swimming pool filter membrane film hole generally greater than the membrane filter. The water quality of the filtered water is not required. The whole set of devices is a dummy. The most taboo of the drug administration is to put