管螺纹杂谈(国外英文资料).docVIP

管螺纹杂谈(国外英文资料) How does the nominal diameter of the npt1/8 thread count Reward points: 15-resolution time: 2009-5-1 17:55 The nominal diameter of npt1/8 thread is calculated, its not found out, I want the formula, its a plus, right Questioner: hjw3101 - the best answer to the best answer, British thread, 1/8 inches (25.4 mm) is commonly known as a four-point thread 4X25. 4/10 = 10 Its basically the size of the M10 Its not calculated, its checked out. There is a general mechanical design manual Answer: lingjianmingxi - assistant secondary, 2009-4-29 23:31 Can be calculated, according to the 60 ° taper pipe thread of some basic parameters are calculated. The data in the design manual has become a basic one, and you draw a simple picture yourself and try it out. Responder: class A design engineer - assistant 3rd class of 2009-4-30 08:53 Its found. Look at the thread. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- What does NPTF NPTM thread mean? Reward points: 0-resolution time: 2006-7-4 10:51 Questioner: dsy3921 - the NPT: National (American) Pipe Thread American Pipe Thread. F: Female Female. M: Male Male -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- How does the nominal diameter of the metric thread be converted to a millimeter, such as 8 in 8-32 UNC Reward points: 0-resolution time: 2009-5-27 20:59 Questioner: the four seasons seek wind - the best answer of the probationary period. 25.4 * (0.06 + 0.013 * 8) = 4.1656 mm The above is a formula for the diameter of the UNC, which is 8 # and the rest is a constant, so the other 4-40unc teeth, 25.4 * (0.06 + 0.013 * 4) = 2.845 mm And so on. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- G1/2, how do you understand how the g3/8 thread is understood, how do yo